The ATC 250R 3um


How to Adjust Clutch Cable on an ATC 250R

stanoo1

  • *
  • 14
  • I Enjoy Vintage Honda ATC's
    • View Profile
How to Adjust Clutch Cable on an ATC 250R
« on: October 17, 2016, 11:13:23 AM »
How to Adjust Clutch Cable on an ATC 250R

Looking to make a clutch cable adjustment on my 250R. Is there an actual procedure of how to adjust the clutch cable on an ATC 250R. I feel like the clutch hand lever has to be pulled too far to get the clutch to disengage. I see the adjuster on the handlebars, but I was wondering if there is something else I need to pay attention to...

Many thanks!

malph

  • *
  • 9
  • I Enjoy Vintage Honda ATC's
    • View Profile
Re: How to Adjust Clutch Cable on an ATC 250R
« Reply #1 on: October 19, 2016, 01:57:26 PM »
Clutch Cable Adjusting?

You should be able to use your judgement on the adjustment of the clutch cable. I think there is a spec on how much play should be in the cable, but what is important is that you are not disengaging the clutch when the cable is released. You can make adjustments on the handlebars or at the engine. Again, I'm not sure of the exact amount of play they specify, but you should be able to make your adjustments by feel.