Message: Great job on the 250R restoration project. I'm pretty much half done with my machine and I'm hoping to send in some pics of the entire project when I finish it.
Posted By: Mell
Date posted: December 21, 2014 - 02:37 pm
Message: I would assume you had no trouble finding 250R restoration parts online. I was able to track down everything I needed to this point. Was there any obsolete Honda ATC parts you had trouble finding? Overall, your trike looks fantastic.
Posted By: Mark Stockton
Date posted: November 16, 2013 - 11:15 am
Message: Hello I recently received a 20R ATC, 1982. The front brake will not produce pressure, I took everything apart and cleaned all and put it back together. The piston on the front brake was stuck and now moves, but I don't know what I may need to get the pressure through the line to move the piston. Does this seem to be the master cylinder?
Posted By: Biker
Date posted: August 31, 2013 - 02:36 am
Message: Nice job on the 250R
Posted By: Chas
Date posted: July 18, 2013 - 12:06 am
Message: Pictures look good. I'm thinking about restoring an old Honda ATC. I'm at the stage of scoping out restoration candidates. Most likely it will be a 250R.
Posted By: Greg
Date posted: June 08, 2013 - 01:46 am
Message: Hello, I partially restored a 250R back in the late 1980s. It ran like a bear and looked awesome. Three wheelers were going the way of the wooden wheel back then so I dumped it for a Quadracer. Wish I had the 250R back, hindsight is always 20-20.
Posted By: Greg
Date posted: June 08, 2013 - 06:31 am
Message: Cool set of pics, how does the finished restoration run for you? Just about to start my own 250R project.
Posted By: kirk Fontenot
Date posted: November 18, 2012 - 03:43 pm
Message: Who & how much to port my 1983 250r 3 wheeler?
Posted By: allen
Date posted: September 02, 2012 - 07:27 am
Message: Completed restoration looks awesome. How does it ride? Like new I would imagine.
Posted By: Rich
Date posted: September 02, 2012 - 07:01 am
Message: This is a great depiction of a restoration on a 250R. I am a former owner of an 83 250R who is in search of a replacement for my former toy. I hope to purchase one soon and begin a similar restoration.
Nice job on the 250R resto!
Posted By: GROSSO MARC
Date posted: August 07, 2011 - 10:55 am
Posted By: marco
Date posted: July 23, 2011 - 12:13 am
250R Restoration Comments and Questions
This comment system is no longer active... Please post comments, questions, and restoration pictures in our 250R forum. Thanks!